How to Change Font Size in Family Tree Maker

This is a general overview covering the various options for customizing, formatting and saving a nautical chart of your selection. We also accept private help articles that guide you through creating whatsoever report you choose. Simply search our knowledge base by inputting the name of the report y'all would like to create in the Search Online Help field.

This article discusses the following:

• Nautical chart Preview
• Right Clicking Options
• Chart Options Icons
• Chart Options
• Nautical chart Options Checkboxes

Chart Preview

In the Preview area of your nautical chart at that place are several options for viewing, equally well equally full general information about the chart.

1. This arrow will fit your chart into the preview pane. Depending on the size of your chart, this may make the chart very small, which you could then aggrandize.
2. This button zooms in to 100%, or the actual size of the chart.
3. This option allows y'all to cull the zoom level of your nautical chart. Click on the pointer to select a zoom percent, or type a number in the box.
4. This push allows y'all to hibernate or display folio breaks. This option is only available in Family Tree Makers 2011-2014, when you have your Layout set as Affiche.
5. This tells you how many pages your chart will print as, likewise as the paper size you selected, and the actual size of the Chart. Y'all can change the newspaper size in Page Setup. Please note you will not exist able to consign or print any chart larger than 200 inches.

Note: When you create a Relationship chart you will take the following options instead for your Nautical chart Preview:

1. This Hand Tool icon allows you lot to grab and drag the document to motility the page effectually.
2. This selection allows you to choose the zoom level of your chart. Click on the arrow to select a zoom percentage, or blazon a number in the box.
3. These icons let you lot to zoom in and out.
4. These arrows let yous to navigate to dissimilar pages of the document.
5. This icon allows you to view your chart/report from a distance several different ways.

Right Clicking Options

Note: Right clicking options vary slightly depending upon which version of Family Tree Maker yous have and which chart y'all decided to create. For example, the Human relationship Chart but has the choice to print, export or send the chart via e-mail.

When you correct click on a person's box y'all can access the Preview surface area of your chart. From here there are a few selection options bachelor. Yous have several dissimilar options for selecting individuals from your tree speedily. You can remove people from your chart from here without removing them from your actual family tree file. This can be extremely useful in identifying relationships, or "branches" inside your tree. You lot tin mark generations to make identification easier. Yous tin also export and print from this window.

Removing or Exporting a Branch

To remove a person or entire branch from your chart right click to select them. So right click any of the selected people and click Remove Person from Chart. This will remove that person from the chart. You can likewise use this method to delete the people selected from your file, or to export simply those people as their ain tree. To Export an individual, selected individuals or entire nautical chart click Export from the window.

Marking a Generation

Marking a co-operative or generation can be useful if you have a large chart and would like to hands differentiate between the people. You can marker up to 3 generations. To exercise so, right click to select the people you want to mark, then right click once more and click Marking Selected. Select a Marking.

The people you selected volition modify in appearance. You lot can then get to the Box and Line Styles to change the appearance to your liking.

Chart Options Icons

There are several customization options available from the icons at the superlative of the Chart Options panel to the right of the Chart Preview. The same options are bachelor to you in nearly every nautical chart and vary slightly depending on which version of family tree maker you are utilizing. Below we cover all the options that may exist available in the chart of your pick.

Items to Include

The Items to Include icon volition let you add any facts yous've entered in your tree, whether it'due south someone's birth appointment or their weight, to your chart. Clicking this icon opens a window where yous can add and remove facts from your nautical chart. You can likewise choose to Include just preferred facts, Include bare facts, Include sources, Display user-defined short identify names and Print individual numbers with names. Once you have made your selections click OK and your chart will automatically be updated.

To add together a fact, click on the Blue Plus sign. This opens up another window with a list of the facts available to add together to your chart. To remove a fact, click on the Blood-red 10. To change the order in which facts are listed for each individual, select the fact y'all wish to move and employ the Upward and Downward arrows to change where it appears in the list.

You can also change the labeling options for each included fact by selecting the fact in your listing and clicking the Options button underneath the list of included facts. A window specific to that fact will open. Please annotation that the options y'all choose are only applicative to the chart that yous're working on. For case, if you cull to display last names in all capital letters, this wouldn't change the fashion names are displayed in your family tree or in your index of individuals in the People workspace. You can also Include merely preferred facts, Include blank facts, Include sources, Display user-defined brusk identify names and Print individual numbers with names. Once you have made your selections click OK and your chart will automatically be updated.

Fonts

You can alter font options by clicking on the second icon, Fonts . This opens a window from which you tin can alter non only the font, simply as well the text style, size, alignment, and color.

You will need to select which blazon of text to modify from the list of Items to format. At the height of this list are all the facts you've chosen to include in your chart so y'all tin modify those individually, or select Fact Default from the listing to format all the included facts the aforementioned way. As well, you can change the style of the title, the text in boxes, etc. from this carte du jour. When you lot finish making your selections click OK and the changes will be applied automatically.

Box and Line Styles

If y'all wish to highlight certain people in your chart, or add some extra color and style, cull the icon for Box and Line Styles.

From the window that appears you can add and remove the borders effectually people in your chart, add different background colors backside their information, likewise as modify the background colour and border of the entire nautical chart. Additionally, you can change boxes for males and females into dissimilar colors to highlight the gender distribution in your family. You tin can also modify the width and shape of the box sizes and change the color, size and type of pedigree and divider lines. When yous end making your selections click OK and the changes will exist applied automatically.

Header and Footer

If you want to add page numbers to a chart, or if you take prepared a chart for someone else and want to include your preparer information, the Header/Footer options will allow yous to customize what appears at the very tiptop and bottom of your chart. When you select the icon the Header/Footer window will announced.

Notation: Depending on what the Layout of your chart is set every bit, you lot may not exist able to access all of these options. The Poster layout does not have the option to add a Chart Note or page numbers since it is a one folio format. In some charts the poster layout is the only option you can select.

The Chart Note, if you have the option to include it, will show at the bottom of your nautical chart. Include submitter info displays whatsoever y'all entered equally your User Data. This can be accessed through the Tools menu in the top left-mitt area of Family Tree Maker. Include appointment/time of printing volition requite the chart a stamp of the fourth dimension or date of when y'all selected this option. If you continue to work on your chart after selecting this option, you will need to de-select this option, click OK, and re-select in order to testify an authentic fourth dimension stamp. You can also choose to Print "Created with Family unit Tree Maker" statement or Include page/nautical chart numbers in the header or footer. When you end making your selections click OK and the changes will be applied automatically.

Insert Epitome or Text Box

An exciting new feature in Family Tree Maker 2012 and 2014 is the option to Insert a Text Box . Although you lot could Insert an Image in previous versions, text boxes are new to the 2012 release. Yous can add together an image or text box anywhere in your chart by selecting this option.

• Insert Paradigm From Media Collection opens a window from which you lot tin select media that you have previously added to your family tree file. Choose an epitome and click OK.
• Insert Image From File allows you lot to browse your entire estimator to find an image to add together to your nautical chart. Y'all will observe a variety of decorative images in the Embellishments folder located in the Family unit Tree Maker folder nether Documents. If you want to resize the image, click on the paradigm and move the cursor over the boxes in the bottom-right mitt corner. Then click and elevate the boxes to arrange the size of the image or select the entire epitome to relocate on your chart.

  

  Correct clicking the image gives you several options:

  • Reset Paradigm: restores the prototype as it was when it was offset inserted
  • Move to Front end/Dorsum: brings the epitome to the top, forepart, bottom or back
  • Motility Forrad/Astern: brings the paradigm one step or layer forward or backward
  • Layout: Lets you control the way the image is displayed inside the box
  • Border: allows you to add a single or double border to the box for the image
  • Alignment: select multiple items and align them speedily
  • Makes Same Size: select multiple items and make them the same size quickly
  • Delete Image and Selected Items: utilize to delete i or more items from the page
• Insert Text Boxwill create a box in which you tin can enter text. Once selected you can click on the box that is created in your chart or study and motion it to the place that you would like the text to be displayed. In one case you have placed it, simply double click on the box and this volition open a window from which you can enter the text. If you wish to modify the way the text box appears, select the appropriate settings from Font and Box and Line Styles.

Folio Setup

The Page Setup is keen if you know yous will exist printing your chart on non-standard sized paper, if y'all wish to change the page orientation, or if you want to change how much white space will bear witness betwixt your nautical chart and the edge of the paper. The Size drop-downwards list will allow y'all to modify the size of the newspaper if your printer is capable of press larger sheets. Otherwise, exit this section at letter size, which is a standard 8 ½ "x 11" canvass of paper. In the Orientation department, click Portrait if yous would like your document to print vertically, or click Mural if yous would like your document to print horizontally. In the Margins department, you can adjust the margin size of the chart. When you finish making your selections click OK and the changes will be practical automatically.

Save Settings

Once your chart is customized the way you like, you tin can save the formatting settings that you've chosen by clicking on the Salve Settings icon. You'll have the option to either save the options you've chosen every bit the preferred template for the type of nautical chart you're working on, or create a new template which you tin can use to future charts of whatsoever type.

Use Saved Settings

The Use Saved Settings icon allows you lot to access previously saved templates so you can create multiple charts with the same formatting options without the need to re-select every single selection again. Family Tree Maker 2012-2014 also comes with a few pre-made templates that you may wish to utilize for your charts. You tin even apply these every bit starting points to stimulate your formatting creativity.

Save Nautical chart

The Save Chart icon lets yous save your entire chart – people, facts, formatting, and all – within Family Tree Maker. Once you lot click on the icon you can then choose to rename the chart if you would similar. When you are finished click Save.

You tin access your saved charts from the Collection tab within the Plan workspace, under Saved Charts. Please click here for more information on saving a chart inside Family unit Tree Maker and every bit an external file on your calculator'southward hard drive.

Reset Chart

The reset icon allows yous to reset the chart or report you are working on to the default settings. If you select this option it will be immediately practical.

Note: This option is only bachelor in Family Tree Maker 2008-2010. Newer versions accept reset icons, in most cases, directly to the right of each category. This allows for you to make a more targeted approach to revising your work.

Chart Options

There are several options available in the Chart Options panel to the correct of the Nautical chart Preview. The same options are available to you lot in virtually every chart and vary slightly depending on which version of family tree maker yous are utilizing. Beneath we encompass all the major options that may exist bachelor in the chart of your choice.

Chart Title

The title is the text that will announced at the top of your Chart. To alter the title of your chart click in the Chart title field and brand the desired change. Printing Tab on your keyboard to utilize the changes and click the Salve Chart icon to rename and relieve the file. The sometime saved nautical chart file needs to exist deleted. Clicking the Bluish Reset Arrow volition return the chart to the default title and location.

Layout

There are two basic layout options for about Charts: Book and Poster. Book layout is best if this is a chart you want to include in a book, as it neatly shows a gear up number of generations per page. Poster layout puts the whole chart into ane large poster that yous tin print or have printed at a print shop. Every chart has the Poster option, just the Full-blooded, Descendant, Hourglass, and Vertical Pedigree have the Book layout pick.

If y'all select Poster every bit your layout, the Avant-garde button directly to the right of the layout options will appear. This volition allow you to adjust the spacing, overlap, and position of elements in a pedigree chart with a poster layout. Adjusting the layout can help you fit the poster onto the desired number of pages.

Note: The Advanced layout option is not available for the Extended Family Chart.

• The Horizontal Spacing slider allows you lot to control the amount of space between the right side of one node and the left side of the node next to it. The viewer updates every bit you make adjustments to the horizontal spacing.
• The Vertical Spacing slider controls the amount of infinite betwixt the right side of one node and the left side of the node next to it. The viewer updates every bit y'all make adjustments to the horizontal spacing.
• The Affiche Viewer displays a preview of how the chart will print. The light gray lines indicate where the page breaks will exist when the chart is printed.
• The Automated Zoom adjusts the viewer to display the chart at the zoom level y'all accept selected: Fit horizontally adjusts the chart to the width of the viewer, Fit vertically adjusts the chart to the height of the viewer, and the Lock attribute keeps the chart proportionally authentic. When the Lock aspect is not selected the viewer may stretch the chart to fit horizontally or vertically. This does non touch how the chart is printed.
• Positioning controls the position of the chart on the pages of the poster. Reset returns the nautical chart to the settings that were in result when you opened the Advanced layout dialog box, Center moves the chart to the horizontal and vertical centers of the available pages, and No Page Overlap adjusts the nautical chart so none of the boxes are cleaved across pages.

Once you terminate your selections click Ok and the adjustments you fabricated will exist applied automatically.

Notation: Family unit Tree Maker 2008 does not accept an Advanced option for posters.

Spacing

The Spacing option allows you lot to take advantage of the vertical space in the chart yous select. If all the fact fields are not used for an private, the records can be moved closer together vertically to save space.

In that location are iv vertical spacing options available to you. Perfect gives you nice, fifty-fifty spacing betwixt rows of people in your chart, while Collapsed brings everyone closer together. Squished removes all of the actress white spaces between records. Custom utilizes the Avant-garde Poster settings you created, and is not applicable for all charts.

You tin click and drag individual boxes to create a custom layout of people in your nautical chart. Delight annotation that whatsoever changes fabricated in this fashion will reset if you modify any of the chart options. Clicking and dragging boxes, if you desire to exercise so, should exist a final step in the cosmos and customization of your nautical chart.

Generations

You can customize the number of generations of Ancestors or Descendants that appear in your chart. The more generations you choose, the larger your chart will become. Please notation, you lot will not be able to export or print any chart larger than 200 inches.

Background

You can add together a groundwork picture to your nautical chart by clicking the drib downwardly arrow directly to the right of Background. Family Tree Maker comes pre-loaded with some images for yous to utilize in your chart. To check out these backgrounds, select Browse For Image from the drop downward menu. This option will too allow you to look elsewhere on your computer for other image files you may wish to employ equally a background for your chart. If y'all take a media detail already attached to your family tree that you would adopt to use equally a background image, choose Select From Media Drove. You can also change the Transparency so the prototype appears more or less vibrant, and fix the alignment to either Center the paradigm to the middle of your chart, Stretch to the dimensions of your chart, which may cause the image to distort, Zoom to fill up the entire background without distortion, or repeat in a Tile formation. If you would rather accept a solid groundwork color rather than an image, you lot can do so by clicking the Box and Line Styles button directly under Chart Options and select a nautical chart background color.

Pictures

You tin can include photos in your chart besides. The same flick you meet for each person in the People workspace is the picture that will appear in the Full-blooded Nautical chart. For more information on how to assign a portrait to an individual, please click here. At that place are two means to display photos: Thumbnails, which are a depression quality and smaller version, and photos that are the full-quality image resized to fit. You can set up the picture alignment to the Heart of boxes, the Peak of boxes, Stretched to the top of boxes, though this may cause photos to look distorted, or Zoomed to the acme of boxes, which will crop photos to the left and right to fit without distortion. Additionally, you tin can choose to fix a photo to the Left, Right, or Behind the text inside boxes. Yous tin change the size of these pictures by changing how many inches wide the picture volition be inside the person'due south box. If you wish to testify a generic gender silhouette for people that don't take pictures assigned to them, check the Use silhouettes box.

Marshal Nodes

Note: The Marshal Nodes pick is not bachelor in Family Tree Maker 2009 when creating a Horizontal Hourglass chart.

The Marshal Nodes option allows yous to specify where the line connects to a node in the nautical chart. Each record is considered a node. The root is connected to two parent nodes, and and so on. The height of the node is the line below the name. There are several options to cull from: Superlative is the traditional connection betwixt nodes, Heart connects each node with a curved line, Bezier connect each node with a curved line, and Directly connects each node with a direct line.

Overlap

Note: The Overlap option is not available in Family Tree Maker 2009 when creating a Horizontal Hourglass chart.

The Overlap option takes reward of horizontal space inherent in Pedigree and Horizontal Hourglass charts. Because of the amount of horizontal white space in these ii charts, it is possible to overlap of names and facts in the first ii or iii generations without overwriting any text. This allows you to include more generations on a single folio. There are several options to cull from: Columns Overlap will overlap generations wherever there is room, Only Root Overlaps will make it so no columns overlap except for the root person, and No Overlap will accept all generations to remain in their own cavalcade.

Chart Options Checkboxes

There are several checkboxes at the bottom of the Options pane to help y'all customize your chart. These checkboxes change depending on the layout you've chosen and the chart you are using, simply below is a general overview of the checkbox options normally available.

Center tree on folio

Centers the nautical chart vertically inside the poster. When Center tree on folio is not selected, the nautical chart begins in the top-left corner of the poster.

Include empty branches

Allows you lot to include blank branches of your tree in which you have not entered any data. This may be useful if you want to see what info you are missing, or if y'all desire a paper copy to fill out missing information away from your computer.

Show generation labels

Includes a box at the height of the chart with the proper name of the generation, i.e. Parents, Grandparents, etc. and can be useful if you have a large chart and may not be able to immediately tell the human relationship to the root person.

Include siblings of primary private

Brothers and sisters to the person selected in the report volition be displayed. Siblings volition show on the same level as the primary person.

Include spouses of chief individual

Displays husband or wife of the person selected in the study.

Boxes overlap page breaks

This selection is useful if you lot plan to get your chart printed on large poster paper. It manages the spacing between individuals equally though information technology were printed on a unmarried sheet. If you are planning to impress the nautical chart on standard-sized paper, yous may wish to un-check this option so the boxes don't split between pages.

Generate Chart

This option refreshes the chart according to the settings selected. The Blueish Reset Icon resets the marking, removed person, and box locations. It does non reset layout settings such as spacing or background. To reset those settings, click Employ Salvage Settings and select Default Template.

Person locator

For ease of navigation inside your nautical chart, you lot may wish to apply the person locator. Clicking the Select Root Person push takes you directly to the person you selected prior to generating the chart. You lot tin can also select from a list of all people in the chart from the drop downward list just to the right of this button. If an private is in multiple places in your chart, this will be indicated in the next box which shows the number of instances for the person selected. The instance with the closest relation to the root person is signified by an asterisk adjacent to the instance number.

Note: This feature is not available in Family Tree Maker 2008.

torresandsho82.blogspot.com

Source: https://support.mackiev.com/700533-Customize-Format-and-Save-your-Chart-in-Family-Tree-Maker

Share this post